ESP-32F Module + Adapter Board WiFi Bluetooth Dual Core CPU MCU IoT For Arduino

ESP-32F Module + Adapter Board WiFi Bluetooth Dual Core CPU MCU IoT For Arduino
Introduction:
 
The ESP-32F is a universal WiFi-BT-BLE MCU module that is powerful and versatile for low-power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 decoding.
The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled or powered up. The clock frequency can be adjusted from 80 MHz to 240 MHz. The user can power off the CPU and use a low-power coprocessor to constantly monitor the status changes of the peripherals or whether certain analogs exceed the threshold. The ESP32 also integrates a wide range of peripherals including capacitive touch sensors, Hall sensors, low noise sense amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO, SPI, UART, I2S and I2C.
The ESP-32F integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi for a wide range of uses: Wi-Fi supports a wide range of communication connections and direct Internet connection via a router; Bluetooth allows users to connect to mobile phones or broadcast BLE Beacon for signal detection. The ESP32 chip's sleep current is less than 5 μA, making it suitable for battery-powered wearable electronics. The ESP-32F supports data rates up to 150 Mbps and a power amplifier with an output power of 22 dBm for maximum wireless communication. As a result, the chip has industry-leading specifications and performs best in terms of high integration, wireless transmission distance, power consumption, and network connectivity.
The ESP32's operating system is a freeRTOS with LWIP and TLS 1.2 with hardware acceleration. The chip also supports OTA encryption upgrades, and developers can continue to upgrade after the product is released.
 
CPU:
 
Xtensa® 32-bit LX6 single/dual-core processor with up to 600 DMIPS
448 KB ROM
520 KB SRAM
16 KB SRAM in RTC
QSPI can connect up to 4 Flash / SRAM, up to 16 MB per Flash
Supply voltage: 2.2V to 3.6V
Working current: average: 80 mA
Package size: 18 mm x 25.5 mm x 2.8 mm
Temperature range: -40°C ~ +85°C
 
Clock and Timer:
 
Built-in 8 MHz oscillator with self-calibration
Built-in RC oscillator for self-calibration
Support for external 2 MHz to 40 MHz crystal
Supports an external 32 kHz crystal for RTC with self-calibration
2 timer groups, each consisting of 2 64-bit general-purpose timers and 1 main system watchdog
RTC timer with sub-second precision
RTC watchdog
 
Peripheral interface:
 
12-bit SAR ADC with up to 18 channels
2 8-bit D/A converters
10 touch sensors
Temperature Sensor
4 SPI
2 I2S
2 I2C
3 UARTs
1 Host SD / eMMC / SDIO
1 Slave SDIO / SPI
Ethernet MAC interface with dedicated DMA supporting IEEE 1588
CAN 2.0
IR (TX / RX)
Motor PWM
LED PWM, up to 16 channels
Hall sensor
Ultra low noise preamplifier
 
Wi-Fi:
 
Standard:
 
FCC/CE/IC/TELEC/KCC/SRRC/NCC
 
Protocol:
 
802.11 b/g/n/d/e/i/k/r (802.11n, speeds up to 150 Mbps)
A-PDU and A-MSDU aggregation, support 0.4 μs guard interval
 
Frequency Range:
 
2.4 ~ 2.5 GHz
 
Wi-Fi mode:
 
Station/softAP/SoftAP+station/P2P
 
Security Mechanism:
 
WPA/WPA2/WPA2-Enterprise/WPS
 
Encryption type:
 
AES/RSA/ECC/SHA
 
Bluetooth:
 
Protocol:
 
Compliant with Bluetooth v4.2 BR/EDR and BLE standards
 
RF:
 
NZIF receiver with -98 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters
AFH
 
Audio:
 
CVSD and SBC audio
 
Package includes:
 
1 x ESP-32F module
1 x Adapter plate
2 x Pins






















SKU: S100XVFM5
Availablity In stock
$16.79
$11.99
  • Description
  • Technical Specs
  • Reviews

ESP-32F Module + Adapter Board WiFi Bluetooth Dual Core CPU MCU IoT For Arduino

Title Default Title

Customers Who View This Item Also View